PP syringe filter

Product / Sample preparation

A disposable polypropylene filter for aqueous or organic solutions with high debris levels and for aggressive, hard-to-filter solutions. The membrane offers good thermal stability and chemical compatibility, high porosity and high dirt-holding capacity; the manufacturer gives a maximum operating temperature of ≤ 50 °C.

Product code: SFPP025045NA
Product group: Syringe filters
Brand: Membrane Solutions

Manufacturer website

Source: manufacturer website (opens in a new tab) · Image: manufacturer website

Order codes and options

17 codes

PP syringe filter order codes and properties
Code	Series	Diameter	Pore size	Wettability	Sterile	Pre-filter	Housing	Dead volume	Volume capacity	Pack
SFPP013022N	SimplePure	13 mm	0.22 µm	Hydrophobic	No	None	Polypropylene (PP)	< 20 µL	< 10 mL	100 pcs
SFPP013045N	SimplePure	13 mm	0.45 µm	Hydrophobic	No	None	Polypropylene (PP)	< 20 µL	< 10 mL	100 pcs
SFPP025022N	SimplePure	25 mm	0.22 µm	Hydrophobic	No	None	Polypropylene (PP)	< 100 µL	< 100 mL	100 pcs
SFPP025045N	SimplePure	25 mm	0.45 µm	Hydrophobic	No	None	Polypropylene (PP)	< 100 µL	< 100 mL	100 pcs
SFPP030045N	SuperPure	30 mm	0.45 µm	Hydrophobic	No	Glass fibre	Polypropylene (PP)	< 200 µL	< 100 mL	100 pcs
SFPP013022NA	AllPure	13 mm	0.22 µm	Hydrophobic	No	None	Polypropylene (PP)	< 10 µL	< 10 mL	100 pcs
SFPP013045NA	AllPure	13 mm	0.45 µm	Hydrophobic	No	None	Polypropylene (PP)	< 10 µL	< 10 mL	100 pcs
SFPP025022NA	AllPure	25 mm	0.22 µm	Hydrophobic	No	None	Polypropylene (PP)	< 100 µL	< 50 mL	100 pcs
SFPP025045NA	AllPure	25 mm	0.45 µm	Hydrophobic	No	None	Polypropylene (PP)	< 100 µL	< 50 mL	100 pcs
SFPP004022N	SimplePure	4 mm	0.22 µm	Hydrophobic	No	None	Polypropylene (PP)	< 1 µL	< 1 mL	1 pc
SFPP004045N	SimplePure	4 mm	0.45 µm	Hydrophobic	No	None	Polypropylene (PP)	< 1 µL	< 1 mL	1 pc
SFPP025100N	SimplePure	25 mm	1.0 µm	Hydrophobic	No	None	Polypropylene (PP)	< 100 µL	< 100 mL	100 pcs
SFPP013022NI	iPure	13 mm	0.22 µm	Hydrophilic	No	None	Polypropylene (PP)	< 10 µL	< 10 mL	100 pcs
SFPP013045NI	iPure	13 mm	0.45 µm	Hydrophobic	No	None	Polypropylene (PP)	< 10 µL	< 10 mL	100 pcs
SFPP025022NI	iPure	25 mm	0.22 µm	Hydrophobic	No	None	Polypropylene (PP)	< 100 µL	< 100 mL	100 pcs
SFPP025045NI	iPure	25 mm	0.45 µm	Hydrophobic	No	None	Polypropylene (PP)	< 100 µL	< 100 mL	100 pcs
SFPP0251000N	SimplePure	25 mm	10 µm	Hydrophobic	No	None	Polypropylene (PP)	< 100 µL	< 100 mL	100 pcs

Technical specifications

PP syringe filter technical specifications
Membrane material	Polypropylene
Wettability	Hydrophilic / Hydrophobic
Pore size (options) (µm)	0.22; 0.45; 1.0; 10
Filter diameter (options) (mm)	4; 13; 25; 30
Filter area (cm²)	0.125; 0.92; 1.09; 2.98; 4.08; 4.9 (manufacturer's list, by diameter)
Dead volume (µL)	< 1; < 10; < 20; < 100; < 200 (by diameter)
Body material	Polypropylene (PP)
Max. operating temperature (°C)	≤ 50
Max. operating pressure (bar)	6.0 (87 psi)
Applicable pH range	1–14
Flow rate (ΔP 100 kPa)	0.22 µm: 8 mL/cm²; 0.45 µm: 12 mL/min/cm²; 1.0 µm: 20 mL/min/cm² (ΔP 100 kPa)
Inlet / outlet connection	Female Luer-Lock inlet, male Luer-Slip outlet

Values are given at material family level on the manufacturer page; they are not specific to the catalogue code.

Source: membrane-solutions.com (opens in a new tab) · Technical Parameters table + Online Ordering SKU list (theme/BasicInfo.ashx JSON). Values come from the manufacturer and are confirmed at the quotation stage.