Product / Dissolution
It works by filtering, heating and stirring under vacuum and prepares 8 litres of media in less than 15 minutes. Media is dispensed into any dissolution tester with gravimetric precision of ±0.5%, and a report with weights, mixing ratios, vacuum and temperature follows each dispense. It suits foaming media such as SDS/SLS, washes itself automatically and offers a browser interface and optional CFR compliance.
- Product code
- 0400.0001
Source: manufacturer website (opens in a new tab) · Image: manufacturer website
Technical specifications
DissoPrep X8 technical specifications| Storage volume (g) | 8,000 g net (distributable over 1–36 vessels); 11,000 g gross |
|---|
| Inputs | 2 inlets (water/premixed medium line, additive line); inlet pressure max. 0.1 bar |
|---|
| Dispensing principle | Gravimetric (internal) |
|---|
| Preheating | Up to 45 °C (0.1 °C step) |
|---|
| Temperature accuracy | <1.5 °C (32–37 °C, >5,000 g) |
|---|
| Additive mixing ratio | 1:3 – 1:100 (33% – 1%); max. 1,000 g additive per vessel |
|---|
| Degassing (mbar / ppm) | Vacuum typically <100 mbar (absolute); <5.5 ppm, typically 3.5–4.5 ppm |
|---|
| Efficiency (L/h) | 24–32 |
|---|
| Dispensing rate (mL/min) | 2.000 |
|---|
| Dispensing volume | 50–8,000 g (1 g step) |
|---|
| Dispensing accuracy | <1% (500–8,000 g), typical 2 g |
|---|
| Interface | USB, LAN, RS232 |
|---|
| Dimensions (W × D × H) (mm) | 300 × 600 × 650 |
|---|
| Weight (kg) | 26 (net) |
|---|
| Supply | 230 V or 115 V 1.85 kW, 100 V 1.50 kW (50/60 Hz) |
|---|
Source: riggtek.de (opens in a new tab) · Official brochure, Specifications table (page 2). Values come from the manufacturer and are confirmed at the quotation stage.
Other products from the same brand
